The RIB WinBoat R53 model is a continuation of the RIB series of boats with a cylinder of variable cross-section, our company has received a patent for this design solution. This solution made it possible to significantly increase the volume of the cockpit (up to 30%) compared to the classic RIB trays. The inflatable balloon is made of high-quality PVC with a specific gravity of 1050-1100 g/m2, consisting of three sections, which increases the safety and unsinkability of the boat.
The deck has a high fiberglass side, which eliminates the possibility of damage to the cylinder from the cockpit. The boat uses a two-console layout. The boat is already equipped with all the necessary equipment (steering, fuel system, etc.) and you will only have to install the engine. The transom of the boat is made according to a three- layer scheme with filling over the entire area with moisture-resistant plywood and has a height of L.
The deck has a high fiberglass side, which eliminates the possibility of damage to the cylinder from the cockpit. The boat uses a two-console layout. The boat is already equipped with all the necessary equipment (steering, fuel system, etc.) and you will only have to install the engine. The transom of the boat is made according to a three- layer scheme with filling over the entire area with moisture-resistant plywood and has a height of L.
