RIB boat with a rigid fiberglass hull and an inflatable balloon (PVC density 1050-1100 g/m2), consisting of three sections, which increases the safety and insinuation of the boat.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. There is a recession in the stern of the boat, which reduces the likelihood of water entering through the transom with a strong gas discharge, there are spacious lockers in the bow and stern of the boat.
In the aft cabinet, you can install a battery and a drainage pump. The drain valve allows the sump to be unloaded, bass A scupper is provided in the transom to remove condensation from the inter-deck space. The transom of the boat is made according to a three-layer scheme with filling over the entire area with moisture-resistant plywood and has a summer height.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. There is a recession in the stern of the boat, which reduces the likelihood of water entering through the transom with a strong gas discharge, there are spacious lockers in the bow and stern of the boat.
In the aft cabinet, you can install a battery and a drainage pump. The drain valve allows the sump to be unloaded, bass A scupper is provided in the transom to remove condensation from the inter-deck space. The transom of the boat is made according to a three-layer scheme with filling over the entire area with moisture-resistant plywood and has a summer height.