RIB boat with a rigid fiberglass hull and an inflatable balloon (PVC density 1050-1100 g/m2), consisting of five sections, which increases the safety and unsinkability of the boat.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. The boat has a developed internal set – stringer, which significantly increases the rigidity of the hull. The deck section has a three-layer structure filled with moisture-resistant plywood (9 mm), this solution made it easy to attach any additional equipment to the deck. The deck is flat across the entire width and has a grooved surface that prevents slipping.
A spacious anchor box is provided in the bow of the boat, and a box for installing a drainage pump is provided in the aft part. The transom of the boat is made according to a three-layer scheme with filling over the entire area with moisture-resistant plywood and has a height of S.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. The boat has a developed internal set – stringer, which significantly increases the rigidity of the hull. The deck section has a three-layer structure filled with moisture-resistant plywood (9 mm), this solution made it easy to attach any additional equipment to the deck. The deck is flat across the entire width and has a grooved surface that prevents slipping.
A spacious anchor box is provided in the bow of the boat, and a box for installing a drainage pump is provided in the aft part. The transom of the boat is made according to a three-layer scheme with filling over the entire area with moisture-resistant plywood and has a height of S.