The boat is designed to install a remote-controlled motor, has a roomy bow and stern locker. The aft locker easily accommodates the fuel system and battery box. A developed recession separates the cockpit of the boat from the engine space and completely prevents water from entering the boat from the transom side.
RIB boats with a rigid fiberglass hull and an inflatable balloon consisting of five sections, which allows the safety and unsinkability of the boat.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. The boat has a developed internal set – stringer, which significantly increases the rigidity of the hull. The deck section has a three-layer structure filled with moisture-resistant plywood (9 mm), this solution made it easy to attach any additional equipment to the deck. The deck is flat across the entire width and has a grooved surface that prevents slipping.
RIB boats with a rigid fiberglass hull and an inflatable balloon consisting of five sections, which allows the safety and unsinkability of the boat.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. The boat has a developed internal set – stringer, which significantly increases the rigidity of the hull. The deck section has a three-layer structure filled with moisture-resistant plywood (9 mm), this solution made it easy to attach any additional equipment to the deck. The deck is flat across the entire width and has a grooved surface that prevents slipping.
