RIB boat with a rigid fiberglass hull and an inflatable balloon (PVC density 1050-1100 g/m2), consisting of three sections, which increases the safety and unsinkability of the boat.
The sofa locker is an L-shaped lid mounted on the nasal wall of the recess, with a support roller under the back. The locker easily accommodates a fuel tank, battery, electric pump.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. A feature of this model compared to the 375R and 375R Luxe boats is the increased keel of the hull, which increases comfort when riding a wave.
There is a recession in the stern of the boat, which reduces the likelihood of water entering through the transom with a sharp discharge of gas, there are spacious lockers in the bow and stern of the boat. The drain valve allows you to drain the cockpit bypassing the inter-deck space. A scupper is provided in the transom to remove condensate from the inter-deck space. The transom of the boat is made according to a three-layer scheme with filling the entire area with moisture-resistant plywood and has a height of S.
The sofa locker is an L-shaped lid mounted on the nasal wall of the recess, with a support roller under the back. The locker easily accommodates a fuel tank, battery, electric pump.
The rigid fiberglass bottom gives the boat excellent handling and seaworthiness. The thickness of the hull along the keel line is about 8 mm. A feature of this model compared to the 375R and 375R Luxe boats is the increased keel of the hull, which increases comfort when riding a wave.
There is a recession in the stern of the boat, which reduces the likelihood of water entering through the transom with a sharp discharge of gas, there are spacious lockers in the bow and stern of the boat. The drain valve allows you to drain the cockpit bypassing the inter-deck space. A scupper is provided in the transom to remove condensate from the inter-deck space. The transom of the boat is made according to a three-layer scheme with filling the entire area with moisture-resistant plywood and has a height of S.
